Thursday, September 26, 2019
Crisis Action Plan Essay Example | Topics and Well Written Essays - 2250 words
Crisis Action Plan - Essay Example The main concern about a nuclear-armed Iran is a potential security threat to the region. The country has an aggressive foreign policy, particularly towards Israel and moderate U.S allies in the Arabian Peninsula. Iran can, therefore, use nuclear weapons against Israel, Saudi Arabia, Bahrain and America together with its interests in the region. Iran is also known to support terrorist organizations such as Hezbollah, which opposes the existence of Israel. Iran can share its nuclear technology with the Palestinian militant group, Hamas, which governs Gaza Strip. If Iran is not disarmed immediately, there will be catastrophic security consequences to its perceived enemies in the Middle East and Europe. Iran has ballistic missiles in its arsenal that are capable of hitting targets in the neighboring countries. The first course of action is to bomb precisely some nuclear production facilities located in different parts of the country. The aim of such bombings would be to get Iranââ¬â¢s President Hassan Rouhaniââ¬â¢s attention and to deter him from resorting to nuclear weapons in the future. Targets could include buried nuclear facilities in Natanz, near Tehran and Fordo, near the holy city of Qom. The uranium conversion facility at Isfahan and the heavy-water production plant in Arak could also be targeted. The desirability of this choice is that it could be mounted swiftly and with minimal risk to the American forces involved. The artillery for selection would be Tomahawk land-attack cruise missiles fired from the navy submarines and warships. The COA is adequate; it can accomplish its mission of forcing Tehran to give up its nuclear ambitions. The attacks could be mounted swiftly and with minimal risks to the U.S forces involved. If Tehran learns that there is a credible risk of further military attacks, it will accept a peaceful means to destroy its nuclear weapons stockpiles and give up further development of the lethal weaponry. Thus,
Wednesday, September 25, 2019
Parkinsons Disease Essay Example | Topics and Well Written Essays - 1750 words
Parkinsons Disease - Essay Example According to the essay "Parkinsonââ¬â¢s disease" findings, usually the patient experience ââ¬Å"restingâ⬠tremor. The tremor, however, may disappear when the patient moves voluntarily and when he sleeps. Other symptoms include rigidity of cogwheel type which is due to stiffness and increased muscle tone (Miller & Stein 2000). What happens with rigidity is that the signal coming from the brain is disturbed thus the muscle remains tensed and contracted. As a result, the patient may feel pain when he moves. The muscle also becomes weak because the opposing muscle is relaxed with the same altered brain signal. The patient may also experience bradykinesia characterized by slow automatic movement (Stein & Miller 2000). The movement could be unpredictable. At one time the movement is easy but other times it could be difficult needing assistance. This makes the simple activity like dressing or washing takes time for a patient. Stooped posture is also evident with Parkinson patients characterized by leaning forward and backward. Having this kind of instability may lead to impaired balance and coordination which might cause fall or bumps. As the disease progresses, the patient may also develop shuffling propulsive gait. He may also have the relaxed arm swinging while walking with the bent trunk. Thus a Parkinson patient is said to resemble a car without a break (Hladysz n. d). All of the syndrome effects is a result of the overstimulation of the postural muscle of the neck trunk, and upper limbs.
Tuesday, September 24, 2019
Are Democracies Inherently Peaceful Essay Example | Topics and Well Written Essays - 1750 words
Are Democracies Inherently Peaceful - Essay Example The main reason people oppose monocracy and military rule is that countries led by such ruling systems are more likely to engage in wars and other type of international conflicts as compared to democratic system. Citizens of those states cannot obtain a peaceful living environment and this situation adversely affects their quality of living. As compared to monocracy, oligocracy, or military rule, democracies are inherently peaceful unless they are unjustifiably attacked by external powers. Giving specific focus to the era of World War I & II, this paper will discuss how democracies are inherently peaceful. Democracy and Peace Many authors opine that democracies strive to provide a peaceful living situation to their people and ensure that living standards of citizens are improved continuously. Undoubtedly, a countryââ¬â¢s citizens are the primary stakeholders of a war as they actually bear the miseries of engaging in or financing wars. Therefore, common people are less likely to su pport wars or cross border intrusions. In a democratic country, people have more say in making decisions, and hence they can successfully veto individualsââ¬â¢ decision to fight and finance wars. In contrast, king is the sovereign ruler in monarchies and people have little participation in decision making. As a result, kings can individually take decisions to start or support wars with little personal risk. In order to improve this worse situation, leaders worldwide are strongly supporting democracy. In the opinion of Bass, the Clinton administrationââ¬â¢s efforts to form a global ââ¬Ëcommunity of democraciesââ¬â¢ was an attempt to bring peace to the whole world and it was greatly encouraged by many nations. As Bass notes, in their book ââ¬ËElecting to fightââ¬â¢, political scientists Edward D. Mansfield and Jack Snyder opine that emerging democracies are often unstable and are more likely to fight wars. To justify their claim that new democracies without having fu lly formed domestic institutions are aggressive, the authors cite the examples ranging from Franceââ¬â¢s attack on Prussia in 1870 and Vladimir Putinââ¬â¢s ongoing monstrous clampdown in Chechnya. However, sometimes even fully formed democratic countries become warlike because of several reasons. To explain, it is better to consider the 1959 attack on Egypt by Britain, France, and Israel or Bush administrationââ¬â¢s invasion of Iraq. Those wars were fought because the democratic governments often found it difficult to trust dictators for serious negations. Similarly, the US attack on Afghanistan in 2001 was in response to the 9/11 terror attack by Afghan militants. More clearly, some wars or interventions organized by democratic countries cannot be termed as aggressive or unpeaceful because they are ultimately aimed at the protection of fundamental democratic notions. As Buchanan points out, Elihu Root, Theodore Rooseveltââ¬â¢s secretary of state stated in 1917 that â⠬Å"to be safe, democracy must kill its enemy when it can and where it canâ⬠(np). The democratic peace theory, often referred to as democratic peace, strongly supports the argument that democracies are inherently peaceful. According to Pace, the democratic peace theory states that democracies are not likely to engage in armed conflict with other identified democracies (269). The democratic peace is contrast to the theories describing war engagement and it can be considered as a ââ¬Ëtheory of peaceââ¬â¢ explaining motives that discourage state-sponsored violence. The democratic peace theory is mainly based on the premise that democratic leaders are to bear the responsibility of war losses and they are responsible for answering a voting public. In order to retain their public support, democratic leaders
Monday, September 23, 2019
How to make the registration of property more efficient to Essay
How to make the registration of property more efficient to entrepreneurs in Beirut Lebanon - Essay Example Currently, there exist lengthy procedures in obtaining license for property and businesses making registration process more difficult. The government of Lebanon can make registration process more effective and faster by minimizing the procedures involved in acquiring licenses for property. License acquisition is an imperative step in registration of property and if the government of Lebanon can minimize its process as aforementioned, it would have an efficient and reliable legal system. Moreover, Lebanese government should eliminate the current tradition of delaying licensing of property amongst registration authorities. Eliminating the delays would directly result into reduction of the days needed for obtaining property license. Consequently, Lebanon property registration process would be more efficient and reliable. It is imperious to understand that high taxes levied on government legislation process directly contribute to its inefficiency. Lebanese government authorities that directly engage in property registration process including tax authority and land registry should significantly lower registration fees to increase efficiency of the processes. Lowering property registration fees would also attract more entrepreneurs (World Bank Group 1). The most amicable property registration process prides in free corruption and embezzlement of funds. Apparently, property registration process in Lebanon has remained inefficient and expensive to entrepreneurs due to constant corruption and mismanagement of funds buy Lebanese land registry and tax authority (Haidar 1). Lebanese government should establish fundamental strategies that would aim at eliminating corruption within the property registration system to make the process more accessible, efficient, and inexpensive. Haidar, Jamal Ibrahim. Business Regulations In Lebanon: Where Are We? Where Do We Go Now?. August 1, 2013. Web. November 22, 2014. Accessed
Sunday, September 22, 2019
The Timucua Indians of Northern Florida Essay Example for Free
The Timucua Indians of Northern Florida Essay The Timucua Indians: All were settled agricultural peoples, as skilled with their hoe as they were with canoes or with bows and arrows. They lived in villages, where they cultivated corn, beans, and other crops. Noted warriors, they fiercely resisted early attempts to bring them under submission, but co existed peacefully with the Spaniards for most of the first 198 years of Spanish occupation. Source: Muller, Peter O., Gannon and Fernald, Edward, A. ââ¬Å"Floridaâ⬠Microsoft Encarta 2006 (DVD), Redmond, WA: Microsoft Corporation 2005 The Cherokee- were divided into seven matri lineal clans that were dispersed in war and peace moieties (half-tribes) The people lived in numerous permanent villages, typically placed along rivers and streams. Some villages belonged to the war moiety, the rest to the peace moiety. Cherokee families typically had two dwellings: rectangular summer houses with cane and walls and bark or thatch roofs, and cone shaped winter houses with role frames and brushwork covered by mud or clay. The Cherokee crafted pottery as well as baskets. The bask, or Green Corn Ceremony, was a time of Thanksgiving, Forgiveness, Rekendling of Sacred Fires and Spiritual Renewal. It was held in Mid-to late summer, when the corn was ready for roasting. Source: Waldman, Carl ââ¬Å"Cherokeeâ⬠Microsoft Encarta 2006 (DVD). Redmond, WA: Microsoft Corporation 2005 (Writerââ¬â¢s notes: These are the only pictures I got) Source: University of Washington Libraries, Digital Collections. Comparing the Timucua and Cherokee Indian tribes. Both of them are engaged in Agriculture. I think, the Timucua are the warrior type. Mentioning their skills with canoes and bow and arrow. The attitude of resisting early attempts to bring them under submission. For me, it is a rigid culture and thinking. While the Cherokee, who were subdivided Into seven matri lineal clans or half tribes, were the flexible type of people. Since being a warrior means to kill people, who are supposedly the enemy. The Cherokee, though, they also have their warrior clans. But the practice of Green Corn Ceremony made them the exact opposite of the Timucua Indians, who are more on skills, this is about physical attributes. While the Cherokee is on non-physical attributes. To be a warrior, means being engaged in wars or warfare, which means about being fierce and destructive. But on the other hand, for the Cherokee,I consider them to be the constructive, and productive type of people. Though, the Timucua, for being resistive against their enemies must have spent a lot of time developing and training for the skills in war. It is like choosing two things. You resist, but you will become less productive, yet if you submit, then you will learn something new and perhaps will have a much better life. Now, what it means to submit to a superior force, who were their enemies at that time, is it becoming a slave and their self-respect gone. Perhaps, for the Timucua, it is better to fight and die. At this moment, presently we have the advantages in terms of education. The Indian tribes, are then considered as ignorant, but history is actually the judge of which each of us shall learn something. For me, a warrior thinks differently. And it is something which is unique for a tribe, or a culture, something inherent, of which one cannot take away or get rid of it. The only way perhaps, is to find a way to help him change his mind.
Saturday, September 21, 2019
Operation of the Power Transformer
Operation of the Power Transformer CHAPTER 1 INTRODUCTION 1.1 Project Overview A factor of main economic importance and safety in electrical utilities and industrial customers of electricity is dependent on the operation of the power transformer. In the current economic situation, most of the supply utilities and industries tighten their control on production spending of capital and make savings in maintenance as well as ensuring the reliability of electricity supply. A power failure can increase the electrical loads. These loads will defer purchasing additional plant capacity and can cause the stress on the transformer increases. Thus, monitoring should be conducted to ensure the reliability of the net effect of the thermal voltage, electrical and mechanical service requirements brought about by the increase. Regular sampling and testing of insulation oil taken from the transformer is a valuable technique in the preventative maintenance program. The transformer can be used longer if a proactive approach undertaken based on the transformer oils condition. During an operation of a power transformer, transformer oil is subject to form electrical and mechanical stresses. Besides that, there are also contaminations caused by chemical interaction with windings and other solid insulations, catalysed by high operating temperature. Consequently, the original chemical properties of transformer oil changes gradually, cause it no longer function effectively after many years. Therefore, this oil should be tested periodically to ascertain its basic electrical properties, and make sure it is suitable for further use or necessary actions like filtration has to be done. The details of conducting these test is available in the standards issued by the IEC, ASTM, IS, BS. 1.2 Background Problem The dielectric strength of insulating oil is the oils ability to withstand electrical stress without failure. This test is done by applying a controlled ac voltage to two electrodes which are immersed in the insulating oil. The gap between two electrodes placed in a specified distance. The voltage recorded when the current arc across this gap is the dielectric strength breakdown strength of the insulating liquid. Contaminants such as water, carbon, sediment and conducting particles can reduce the dielectric strength of insulating oil. Clean dry oil has an inherently high dielectric strength but this does not indicates the absence of all contaminates, it may indicate that the amount of contaminants present between the electrodes is not large enough to affect the average breakdown voltage of the liquid. Power transformers are often operated under aged conditions. Thus the moisture content in oil increases, aging products become dissolved and particles are dispersed. Besides that, transformers are operated under novel environmental conditions, were low or high pressures exist. A safe service necessitates the thorough investigation of these influences. 1.3 Problem Statement Monitoring system of transformer oil existing is usually done in periodically. Duration of each use of transformer oil has been established within a time period for the replacement of the new transformer oil. So, the used transformer oil cannot be fully ensured in accordance with the standards set and this could cause a disruption in the operation of transformer. In addition, the monitoring system of transformer oil existing is expensive as well as the impact of waste oil is hazardous and cannot be disposed of. Thus, a permanent monitoring system of transformer oil with minimal costs should be established to ensure the transformer oil is always good quality to use. 1.4 Objectives The objectives of the project are important to ensure the research will fulfill the solution of the problem of the research. There are intentions conducting the research are shown below:- To study on the transformer oil and the maintenance procedures. To design a dielectric test device for transformer oil with using commercial off-the-shelf (COTS) equipment. 1.5 Scopes The scopes of the project are important to ensure every step is followed in completing the research. The scopes also could be important reference to gain related data or information of the research. Those are the scopes of the project:- To study on the quality of transformer oil. To study on the dielectric strength of transformer oil. To study the maintenance of oil immersed distribution transformer. Literature research about the monitoring of Dielectric Breakdown of transformer oil. To design a Dielectric Strength testing circuit. To analyze the result of Dielectric Strength testing. 1.6 Thesis Outline In preparing this project, the development of any information obtained should be gathered and described in each chapter are contained in the project report. Each chapter will discuss some important issues. Through this project, Chapter 1 as an introduction to the project discuss on overview of the project, background problem and problem statement. The objectives and scopes of the project were also discussed in this chapter. Then, Chapter 2 will explain in an inclusive literature review of transformers, transformer oil, the methods of monitoring and maintenance of transformer oil, equipments or tools required and software programming suitable for design the Dielectric Strength testing circuit. Next, Chapter 3 will describe the methodology used in preparing this project. This chapter is important to ensure that methods and tools used systematically and effectively. Chapter 4 will give an explanation and analysis of the circuit to be designed. This chapter also includes the methods and results of tests carried out by using the circuit designed. Problems occur in doing this project and steps to overcome the problems also discussed in this chapter. Finally, Chapter 5 which is the last chapter in this project as the conclusion of the project and some suggestions for further research on this project. CHAPTER 2 LITERATURE REVIEW 2.1 Introduction Transformer is one of the most useful appliances ever invented. Transformer can raise or lower the voltage or current in alternating current (AC) network, the circuit can be isolated from one another, and to increase or decrease the apparent value of a capacitor, inductor, or resistor. Furthermore, the transformer allows us to transmit electricity long distances and to circulate safely in factories and homes. (Electrical Machines, Drives, and Power Systems, 6th Edition). The cost of a transformer is high. The failure of one transformer resulted in a loss in terms of the price of one transformer or in terms of energy supply disruptions to consumers. Therefore, to monitor the transformer oil is one the right way and good for detecting the causes of damage to transformers. 2.2 Transformer Transformer is one of the most important electrical devices. Transformer is widely used in power systems and electronic devices. Transformer can also raise and lower voltage levels and the alternating current to suit application. Transformer can transfer power from one section to another on the same frequency but different voltage levels and currents. Transformer basically consists of two coils of a conductor which acts as an inductor electrically separate but magnetically attached. Transformer consists of two loops wrapped around the core base, core and coil which are a part of the transformer structures. Figure 2.1 shows the general structure of a transformer. When alternating current connected to the transformer primary windings, current will flow through the primary winding. Alternating current flows will create an alternating magnetic flux in the transformer core. The magnetic flux can flow to the secondary winding of the transformer through the transformer core. According to the Faraday law, the electromotive force or voltage is induced in the coil-winding transformer when the flux is changes in value. Because of the magnetic flux in the transformer core is an alternating flux whose value is constantly changing over time, the electromotive force or voltage is always induced in the coil-winding transformer. Electromotive force in the primary winding is known as the self-induced electromotive force is due to the flux generated by the coil itself. While the electromotive force induced in the secondary winding is known as mutual induction electromotive force due to the induced electromotive force is caused by magnetic flux generated from the primary winding. In an ideal transformer, the induced voltage in the secondary winding (Vs) is comparable to the primary voltage (Vp), and is given by the ratio of the number of turns in the secondary (Ns) to the number of turns in the primary (Np) as follows: VsVp= NsNp (2.1) By the selection of the ratio of turns, a transformer thus allows an AC voltage to be stepped up by making Ns greater than Np, or stepped down by making Ns less than Np. There are many types of transformer are designed to meet the specific industrial applications. These include autotransformer, control, current, distribution, general-purpose, instrument, isolation, potential (voltage), power, step-up, and step-down. To avoid rapid damage of the insulating materials inside a transformer, sufficient cooling of the windings and the core must be provided. Indoor transformers below 200 kVA can be directly cooled by the natural flow of the surrounding air. The metallic housing is equipped with ventilating louvres so that the convection currents that can flow over the windings and around the core. Large transformers can be constructed in the same way, but the forced circulation of fresh air must be provided. Such as a dry-type transformers are used inside the building, away from the hostile atmosphere. Distribution transformers below 200 kVA are usually immersed in mineral oil and sealed in a steel tank. Oil carries the heat away to the tank, which it is lost by radiation and convection to the outside air. Insulating oil is much better than air, consequently, it is often used in high voltage transformers. As the power rating increased, external radiators are added to increase cooling surface of the tank contains oil. Oil circulates around the transformer windings and moving through the radiator, where heat released into the surrounding air. For still higher levels, cooling fans blow air over the radiators. For transformers in the megawatt range, cooling can be effected by the oil-water heat exchanger. Hot oil drawn from the transformer tank is pumped into the heat exchanger where it flowing through the pipes that are in contact with cold water. Such as heat exchanger are very effective, but also very expensive, because water itself must continuously cool and recirculated. Some large transformers are designed to have multiple ratings, depending on the cooling method used. Thus, the transformer may have triple ratings depending on whether it is cooled by: the natural circulation of air (AO) for 18000 kVA, or forced-air cooling with fans (FA) for 24000 kVA, or the forced circulation of oil accompanied by forced-air cooling (FOA) for 32000 kVA. These elaborate cooling systems are nevertheless economical because they enable a much greater output from the transformer of a given size and weight. The type of transformer cooling is designated by the following symbols: AA dry-type, self-cooled AFA dry-type, forced-air cooled OA oil-immersed, self-cooled OA/FA oil-immersed, self-cooled/forced-air cooled AO/FA/FOA oil-immersed, self-cooled/forced-air cooled/forced-air, forced-oil cooled The temperature rise by the resistance of oil-immersed transformers is either 55Ã °C or 65Ã °C. The temperature must be kept low to preserve the oil quality. By contrast, the temperature rise of dry-type transformer may be as high as 180Ã °C, depending on the type of insulation used. 2.3 Transformer Oil Transformer oil or insulating oil is usually a highly refined mineral oil that is stable at high temperatures and has excellent electrical insulating properties. It is used in oil-filled transformers. Transformer oil is like the blood in the body of transformer. It must be periodically tested to monitor condition of the transformer. Transformer oil serves three basic functions which are to insulate, to cool and maintain the transformer functions at all times. To keep these functions the industry has agreed on certain standards. The two leading transformer oil specifications in the world are IEC 60296 and ASTM D 3487. In these standards there are many specific requirement and limits based on physical and chemical properties. Many of these properties and their limitations derived from the chemistry of refined mineral oils in combination with application specific requirements of electrical insulation. In an age when alternative to mineral oil being developed, it is important both to know what is desirable and what is likely to achieved in technical terms. Whereas some brands of transformer oil could only meet the specifications, the others excel. In the end, transformer oil consumers should decide which properties are most important to their intended use. Technical specifications also have an impact on issues such as asset management, maintenance planning and investment budget. To help make decisions in these areas it is helpful to have a basic understanding of the science underlying specifications and limitations. In Malaysia, mostly used transformer oil is mineral crude oils (uninhibited mineral oils) which contains Paraffic, Naphteric or mixed. It is supplied by Hyrax Oil Sdn. Bhd. 2.3.1 Transformer Oil Properties The main function of transformer oil is insulating and cooling of the transformer. Thus, it should have the following properties: High dielectric strength and good dielectric properties resulting in minimum power loss. Low viscosity improves cooling. Freedom from inorganic acids, alkali, and corrosive sulphur. Resistant to emulsification. Rapid settling of arc products. Low pour point. High flash point resulting in low evaporation losses due to high thermal stability. High resistivity gives better insulation values between windings. Excellent interfacial tension for quick water separation. Proven resistance to electrical stresses. High electrical strength. Remarkably low sludge and acidity formation in both ageing and oxidation tests gives longer life to oil and equipment during storage and service. 2.3.2 Theory of Transformer Oil Parameters a) Water Content The standard for measuring water content in oil is IEC 60814. (Marcel Dekker, 1990). The important function in transformer oil is to provide electrical insulation. When oil has higher moisture content, it can reduce the insulating properties of the oil, which can cause dielectric breakdown. This is the particular importance with fluctuating temperatures because, transformer will cools down if any dissolved water will become free and this oil become poor insulating power and fluid degradation. (Azliza binti Mohd Jelan,2009). b) Breakdown Voltage Dielectric strength is one of the important characteristic in insulation field. Breakdown voltage of the insulating material is the maximum electric field strength that it can be withstand intrinsically without breaking down and without failure of its insulating properties, dielectric strength also means that a certain configuration and electrode dielectric material that produces minimal damage to the electric field. (Rohaina bt Jaafar, 2003). Breakdown strength in liquid according to various factors influenced in the experiment which is electrode material and surface state, geometry electrode, the presence of chemical pollutants, the presence of physical pollutants, oil molecular structure, temperature and pressure. There also various factors in the theory of voltage breakdown which is like electronic theory, suspended particle theory, cavitations theory and bubble theory were postulated. (Olive Oil from the Tree to the Table). Dielectric strength also depends on the time and method of tension, purity materials, the type of tension as well as experimental and environmental parameters, until set of dielectric strength unique to the specific material is difficult, a range of values can be found and used for application purposes. (Noraniza binti Toriman, 2003). 2.3.3 Types of Transformer Oil a) Mineral Transformer Oil (Mineral Based Oil) A mineral oil is a liquid by product of the petroleum refineries to produce gasoline and other petroleum based products from crude oil. A mineral oil in this sense is transparent and colourless oil composed mainly of alkenes and cyclic paraffin, related to. Mineral oil is a substance of relatively low value, and it is produced in very large amounts. Mineral oil is available in light and heavy grades, and can often be found in drug stores. There are three basic classes of refined mineral oils: Paraffinic oils, based on n-alkenes. Naphthenic oils, based on cycloalkanes. Aromatic oils, based on aromatic hydrocarbons. Table 2.1 Properties of Mineral Transformer Oil (http://www.substech.com) b) Silicon Transformer Oil (Polydimethylsiloxane based fluid) Polydimethylsiloxane (PDMS) belongs to a group of polymeric organosilicon compounds that is often referred to as silicones. PDMS is the most widely used silicon-based organic polymer, and is known for its unusual rheological properties. PDMS is optically clear, and, in general, is considered to be inert, non-toxic and non-flammable. It is called dimethicone and is one of several types of silicone oil (polymerized siloxane). Its applications range from contact lenses and medical devices to elastomers; it is present, also, in shampoos, caulking, lubricating oils, and heat-resistant tiles. Table 2.2 Properties of Silicon Transformer Oil (http://www.substech.com) c) Synthetic Transformer Oil (Organic Esters Based Fluid) Synthetic oil is a lubricant consisting of chemical compounds which are synthesized using chemically modified petroleum components rather than whole crude oil. Synthetic oil is used as a substitute for lubricant refined from petroleum when operating in extremes of temperature, because it generally provides superior mechanical and chemical properties than those found in traditional mineral oils. Table 2.3 Properties of Synthetic Transformer Oil (http://www.substech.com) 2.3.4 Transformer Oil Testing Regular sampling and testing of insulation oil taken from the transformer is a valuable technique in the preventative maintenance program. The transformer can be used longer if a proactive approach undertaken based on the transformer oils condition. Hence, transformer oil must be periodically tested to ensure its basic electrical properties. These tests can be divided into: a) Liquid Power Factor The IEC standard method for this test is IEC 247. This involves measuring the power loss through a thin film of liquid test. Water, contamination, and the decay products of oil oxidation tend to increase the power factor of oil. (A Guide to Transformer Oil Analysis, by I.A.R. GRAY) b) Dielectric Breakdown Strength The dielectric breakdown voltage is a measure of the ability of the oil to withstand electric stress. Dry and clean oil showed the inherent high breakdown voltage. Free water and solid particles, especially the latter in combination with high levels of dissolved water, tend to migrate to areas of high electric stress and dramatically reduce the breakdown voltage. The measurement of breakdown voltage, therefore, serves primarily to indicate the presence of contaminants such as water or conducting particles. A low breakdown voltage can be indicating that one or more of these are present. However, a high breakdown voltage does not necessarily indicate the absence of all contaminants. This test was conducted in accordance with IEC 156. (A Guide to Transformer Oil Analysis, by I.A.R. GRAY) c) Moisture The purpose of dielectric tests are conducted is to ensure the monitoring moisture can be done directly. IEC 733 is a well established and can measure the moisture down to the low part of the million levels. While the acceptable values have been set by the voltage class for moisture, these are somewhat misleading. A truer picture of moisture in the transformer must be taken into account so that percentage saturation of the oil by moisture and percentage moisture by dry weight of the solid insulation can be calculated. (A Guide to Transformer Oil Analysis, by I.A.R. GRAY) d) Neutralization Number (Acidity) This value, measured by IEC standard method IEC 1125A reported as mg KOH / g sample, reports the relative amount of oil oxidation products, especially acids, alcohol and soap. As oil continues to oxidize, the acid increased gradually, generally over the years. Running the acid number regularly provides guidance as to how far oxidation of the oil has proceeded. The acceptable limit by the test is usually used as general guidelines to determine when the oil should be replaced or reclaimed. (A Guide to Transformer Oil Analysis, by I.A.R. GRAY) e) Interfacial Tension The test methods for interfacial tension (IFT), IEC 6295, measuring the strength in mN/m from the interface that will form between service aged oil and distilled water. Because the decay products of oil oxidation are oil and water soluble, their presence would tend to weaken the interface and reduce the interfacial tension value. (A Guide to Transformer Oil Analysis, by I.A.R. GRAY) f) Colour/Visual Field inspection of liquid insulation (IEC 296) includes examination for the presence of cloudy or sediment and the general appearance as well as a colour inspection. As oil ages, it will be darken gradually. Very dark oil or oil that changes drastically over a short period of time may indicate a problem. Any cloudiness or sediment indicates the presence of free water or particles that may be harmful to continued the equipment operation. Taken alone, without considering the past history or other test parameters, the colour is not very important to diagnose transformer problems. If the oil has an acrid or unusual odor, consideration should be given to carrying out further tests. (A Guide To Transformer Oil Analysis, by I.A.R. GRAY) g) Sludge/Sediment The IEC 296 test distinguishes between the sediment and sludge. Sediment is an insoluble substance present in the oil. Sediment may consist of insoluble oxidation or degradation products of solid or liquid materials, solid products such as carbon or metallic oxide and fibres or other foreign matter. Sludge is polymerized oxidation products of solid and liquid insulating material. Sludge is soluble in oil up to a certain limit. At sludge levels above this, the sludge comes out of the solution contributing an additional component to the sediment. The presence of sludge and sediment can change the electrical properties of the oil and prevent the exchange of heat, so encouraging damage to the insulating material. (A Guide to Transformer Oil Analysis, by I.A.R. GRAY) h) Inhibitor Content Inhibited oil deteriorates more slowly than uninhibited oil so long as active oxidation inhibitor is present. However, after the oxidation inhibitor is consumed, the oil can be oxidized at a higher level. Determination of oxidation inhibitor remaining in the in-service transformer oil is based on IEC 666. (A Guide to Transformer Oil Analysis, by I.A.R. GRAY) i) Dissolved Gas Analysis The purpose and functions of the DGA is to provide an indication as to whether there may be an active or incipient tran
Friday, September 20, 2019
Patient-Nurse Relationship: Alcohol Dependency Care
Patient-Nurse Relationship: Alcohol Dependency Care Diagnosis J.H was admitted to Unit 9 with a diagnosis of alcohol dependence causing induced mood disorder with depressive features. The diagnostic criteria outlined by the DSM-IV for substance dependence states that three or more of the following impairments must be seen in the patient, a tolerance for the specific substance, withdrawal symptoms if the substance stops being taken, persistent desire or unsuccessful efforts to cut back or control substance use, reduction or even cessation of important social, occupational, or recreational activities, and substance use in spite of knowledge of having a substance abuse problem (Austin Boyd, 2008). The etiology behind substance abuse is still being researched but the evidence suggests that there are both psychological and biological aspects to addictive personalities. It is also evident that substance abuse and dependence can lead to problems in all parts of the biopsychosocial well being. The interaction took place on unit 9 of the QEH hospital on September 24th at approximately 1530 hrs. The client and the student nurse had discussions in the pantry area of the unit as well as in the common area the conversation of focus took place in the common area. Preceding Critical Events The student nurse had met the client once before and had already started the orientation phases of the nurse-client relationship. The client was cleaning the pantry area of the unit while making himself a cup of coffee. This is when the student nurse approached the client and began a conversation which led to the discussion of focus. Phase of the Nurse-Client Relationship During the conversation of focus the student nurse and the client were in the working phase of the nurse-client relationship. They were in this phase because the client was beginning to outline areas of his illness that needed to be worked on in order to recover. Client and Nursing Partnership Goals Client Health Goals Short Term 1.) Client wants to get into an addiction center outside of PEI. The client has already tried the addiction center at Mt. Herberts and feels that the program does not work for him. This goal was identified by asking the client about the various treatments he has used in the past few years and he mentioned his application to a treatment center in Ontario. 2.) Client also wanted to go on a three hour pass that evening in order to complete some errands at his home. This goal was established after I asked the client what his plans were for the rest of the day. Long Term 1.) Client wants to gain control over his alcohol dependence by attending more AA meetings and getting the proper psychiatric treatment including medications and group work. 2.) Client wants to better his relationship with his two daughters but feels that he first needs to get control of his illness. 3.) Client wants to finalize his divorce, at the current time he is legally separated in order to complete the d ivorce the client must speak to his lawyer and finish some paperwork. Nursing Partnership Goals Short Term 1.) Establish a nurse-client relationship by defining boundaries, assuring confidentiality, and explaining the purpose of the relationship. 2.) Provide client with information regarding treatment center in Ontario. 3.) Gain enough trust with the client so that he feels comfortable to discuss his illness and his history with the student nurse. What I Observed Client was in the pantry area of the unit cleaning while making a cup of coffee. He seemed a little anxious and somewhat rushed (it was later observed that this is simply a part of the client personality.) When I entered the room J immediately greeted me saying Hello Greg, Im just making myself a cup of coffee. I like to try and do my part to keep the place clean his tone, volume, and rhythm were all within normal limits and he seemed to be in a pleasant mood. The client then said Oh, I dont clean up that often the other people here are pretty good at cleaning up after themselves I just like to keep busy. After the patient finished making his cup of coffee he moved to a couch in the common area. His mood was still pleasant and he was very talkative. After J was finished he said something that really caught my attention I know I have a problem but I only binge drink, its not like I drink all the time. Pause Well I shouldnt say that because it is bad enough to just binge drink and I ne ed to get better At this point the patient started to ask questions about me such as where I was from, what I thought of the nursing school, and a few other things. The client was now very relaxed in the couch with his feet up on the coffee table drinking his coffee. What I Thought and Felt When the client greeted me so quickly and in such a pleasant tone I felt that the nurse-client relationship was developing very well and that it was time to start the working phase of the relationship. By the way the client talked about his co-patients and the staff I could tell that he was quite comfortable on the unit. I felt that this would be a good time to start a conversation. I thought that now would be a good opportunity to ask J about what brought him to the unit and to explore his diagnosis. I felt a little nervous thinking of what to say I feared that I may be asking something to private this early in the relationship I was surprised at how easily J opened up about his history and I was slowly starting to feel more comfortable with asking questions about his illness. Again I felt that J was being very honest with me and I could sense that he trusted me as a nurse.
Subscribe to:
Posts (Atom)